In 1981, Tamiya releases the first if its legendary three speeds. The rest is history.
Taking complexity in an R/C vehicle to a new level, the Hilux was equipped with Tamiya’s first three-speed, radio-shiftable transmission. In keeping with the manufacturing traditions of the day, most of this trucks chassis and running gear are metal.
This view shows what’s going on underneath. The clear mechanism box housed the radio and servos and provided a high degree of water resistance. The black box with the silver top in the middle left of the chassis is a transistorized speed controller (an early electronic speed control). Its cousin, the Blazing Blazer, had a mechanical speed control. Up front is the RS-540 motor coupled to the three speed transmission. All these parts were supported by a metal ladder frame very similar to the real thing.
Close up of electronic speed controller. A transistorized unit that did away with the resistor coil in most mechanical speed controllers of the day, this was state of the art back in 1981! The other photo is a comparison with a Blazing Blazer. The Blazer’s mechanical speed controller is in the mechanism box.
The underside reveals the realism afforded by the Hilux. The transmission and transfer case can be seen with drive shafts extending to front and rear differentials. These are not limited slip differentials. The axles are one-piece solid units so turning can be a bit hairy on pavement. The front hubs can be “unlocked” to allow free wheeling on dry pavement, just like the real thing.
Unlike the Blazing Blazer, the Hilux came equipped with oil-filled shocks like those found on the Rough Rider or Sand Scorcher. The extreme angle of the rear shocks cast doubts on their effectiveness, but they sure look cool! The front shocks are set at a more useable angle.
Classic Tamiya Videos of the Hilux and Blazing Blazer here
[wordbay]tamiya hilux[/wordbay]
Originally posted 2014-10-26 02:02:07.
If you would like to make a comment, please fill out the form below.
Bad Behavior has blocked 430 access attempts in the last 7 days.
![[del.icio.us]](http://www.rcgrabbag.com/wp-content/plugins/bookmarkify/delicious.png)
![[Digg]](http://www.rcgrabbag.com/wp-content/plugins/bookmarkify/digg.png)
![[Facebook]](http://www.rcgrabbag.com/wp-content/plugins/bookmarkify/facebook.png)
![[Google]](http://www.rcgrabbag.com/wp-content/plugins/bookmarkify/google.png)
![[StumbleUpon]](http://www.rcgrabbag.com/wp-content/plugins/bookmarkify/stumbleupon.png)
![[Twitter]](http://www.rcgrabbag.com/wp-content/plugins/bookmarkify/twitter.png)
![[Email]](http://www.rcgrabbag.com/wp-content/plugins/bookmarkify/email.png)
i need parts for my 1981 vintage hilux.i was given this truck missin one wheel and rear driveshaft.can you help me to find these parts???
thanx james
I remember when my brother bought this truck and since recently past on. I finally found it in the basement in mint condition. It needs a metal part from front axle to tie rod. Any help?
I need some help finding parts for my 1st gen Hilux. The small 2mm ss bearings that are in the front locking hubs are missing. Also the rear outer hubs are badly worn. Do you know of anyone that might be able to help find these patrs? Thanks Jerry
That’s a tough one. Your best bet is to scour ebay and maybe reach out to some of the sellers there to see if they have any in their stock.
Oil shocks were an aftermarket (hop-up) option. the kit did no come with them. really enjoy your site!
I have one of these in a box in my shed that i haven’t opened in 25years. Does anyone know what it would be worth
If “in a box” meaning untouched/brand new; then a lot. Of course, value is relative to what the buyer is willing to pay. In the past, I’ve such items items go well past the $1,000 mark. Not sure if it was actually sold for that much, but it was listed for that much.
If you have an unassembled or good and working condition original Hilux, I’d be interested in it.